Vintage rides

On last Thursday weather was nice and I decided to use this chance to do some more work on the boat. I leveled the bulkheads and stringers, trimmed all the glass and glued in supports for the floor. Next step is drilling the drain holes and installing the drain PVC pipes. After that I can fix top the hull and the top half of the boat and put it back together. Floor could be done in between those operations: final installation of the floor will be done after installation of the top half of the boat. All I need now is some good weather and next 5 galons of resin:)
Read more...

Finally I had time to work on my boat. Weather was great for working outside, so I pushed my limits and finished glassing the subframe.






First day I was filling the voids and making nice radiused beams. I was using talc as the thickener for resin this time: was kinda disappointed. Compare to cabosil, it's terrible!!! (It's cheap, though: $40 for 50Lb) Hard to get the right ratio, problematic to make it smooth, really fragile... I had to ad in to mix some wood dust and chips - it helped a bit to hold mixture together. Anyway, I finished with that on Thursday, on Friday early in the morning I started glassing. With all fiberglass precut the process was really straight forward: mix new batch of resin, glass, mix again, etc... It was a bit too hot in the afternoon: boat warmed up and the resin working time shortened to 5 minutes! I just started to use smaller batches of resin.
Anyway, big job is done. Next time I will fix all the air bubbles and dry spots and install drainage pipes. After that I could move to the next step and start work with the floor.
Here are some pictures:

















Read more...

Middle of June already... I slowed down with my main projects: just got lazy... I was trying to find excuses, but I don't have any:)Somehow I switched my attention to paintball again. Was working with my main marker - Phantom. Got the under cocking kit for it from Rainman 229, but I couldn't stay the quality of it, so I had to turn the bushing for the handle, mill the mounting block, etc. It's getting there, but still not done. Today I am going to finish this small project and work on the Elan's frame. Just want to cut and weld in the patches. In the evening I am going to the cottage. It suppose to be nice outside for next two days, so I can work with my boat.
Read more...

Not that many things happened lately. I added to the blog list of labels, so it's much easier to find the information on specific topics: Elan, Boat, etc. Also, I added "Read more" option, so the posts on the front page are a bit more manageable. I did some work in the house and spent some time shopping for boat-sled-paintball supplies. Yesterday I bought a sheet of 16 gauge steel, so I can start welding on the Elan frame. Metal supplier charged me $30 for 28”x48” piece– not that bad.
I bottled the second beer brew yesterday as well. This time I added more priming sugar, because the previous batch wasn’t carbonated evenly: one bottle is good, two – flat… Let’s see what happen…
Also I need to get some resin filler for my boat project. Hopefully I will get chance to work on it this week – most likely on the weekend. I am thinking about buying some talc – that’s the cheapest option.
Now, I am back to house renovation… Need to make a trip to Home Depot…
Read more...

I am getting used to stay alone at the cottage:) Nice and quiet; do what I like... I miss the city though: family, dogs, Internet... Anyway, I stayed there 3 nights, made a good progress on the boat.
Here is the picture of 1708 - fiberglass material I use for reinforsing stringers and bulkheads. I will use one layer of it on bulkheads and two layers on stringers.

Here is my working area: all fiberglass cut to size, wood is ready for fireplace:)



I used all the resin filler... Had to use some wood "dust" - not the best filler, but worked as temporary (read permanent) replacement. Need to buy some talc now...

Some pictures of fiberglassed subframe:










Some extra glass here to reinforce the transom:




Some more pictures:











I have a little problem here: thick fiberglass doesn't like corners and points... I needed to cup the plywood with something on the top. I rounded all the edges, thinking that I can wrap the glass around - that was a mistake. Fiberglass doesn't want to stay on the radius... Decided just to cover it with resin for now. On the rest of the subframe I will try to keep tops as flat as possible...
Here are the pictures of the glassed tops...

This one is just covered with resin. I am thinking about thickening the resin with some fibers before applying. Should stay in place better:

Here is the picture of the nose part: same work has to be done... I started from sanding and vacuuming... Hate that part...

Read more...

I had nothing to post lately... Nothing mentionable...
Worked on the Elan frame: removed some paint, etc.
Bought some suppluies for boat project: 5 gal. of resin, 8 kg. of 1708 8" fiberglass tape, etc.
Tomorrow going to the cottage to get some work done: will laminate the stringers and bulkheads to the hull.
Also, started another batch of beer today. Stout again. Bottling in two weeks.

Read more...

I had a great chance to make some progress on the boat today: nice day and free ride to the cottage:)
Today's mantra is "sanding"... Spent four hours sanding the subframe. Vacuumed everything, checked the result and finished missed areas.
After sanding was done...

Raccoon got the grinder!!!


My feet are sore, hands are shaky...
Also, I tried the new for me way to fill the gaps: dispersing compound with a plastic bag. Like the cooks use on the cakes to spread the cream... Worked perfect! All you need to do after - just smooth the bead with a finger:)
Here are some pictures of the beads:


Another angle:


One more shot:

One more:

And the last one...


Next time I will start fiberglassing the subframe to the hull.
Read more...

I decided to add some pictures and history of the boat project.
It's 1975 Chrysler Conqueror 16', 105HP
It had rotted floor, water saturated foam and rotted transom. I decided to repair and modify the boat and started the project in Fall 2009.
Pictures of disassembly, floor/foam removal, etc...

Motor is gone, seats are gone as well


Top half is gone


Quality control...


Transom is soft as a sponge...


Digging the foam


Half way...


Clean hull


New transom is in...


And fiberglassed


Stringers and bulkheads: work in progress...

Read more...